69-01, Jalan Ros Merah 2/2,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-353 2836
+607-353 3836
+607-353 3836
+607-351 0686
- Hose/ Hose Assemblies
- HQC Quick Couplings
- Tubacex
- Butterfly Valves
- Circle Seal Control
- Closed Sampling
- Compression Packing
- Custom Chain Slings
- Custom Magnet Slings
- Dekoron Unitherm
- Diaphragms for Pumps and Valves
- Double Block and Bleed
- Expansion Joints
- Flanges & Monoflanges
- Gas Gasket Seal
- GO Regulators
- Hydraulic Components
- Instrumentation Valve and Manifold
- Klozure
- LubriKup Oil Production Seals
- Magnet Chains Slings
- Metallic Gaskets
- Oil Seal Gasket
- Open Sampling
- PETOL and TITAN Tools
- Breakout Units
- Cathead & Spinning Chain
- Chain Tongs
- Chain Wrenches
- Elevators
- Flange Tools
- Friction Tongs/Vises
- Hammertight Wrench Retainer
- Pump Shop
- Refinery Wrench
- Rig Wrenches
- Run Ticket Box
- Shothole Casing Tools
- Sight Glass
- Slimgrip Tools
- Striking/Hammer Wrenches
- Sucker Rod Transfer
- Sucker Rod Wrenches
- Suckerod Coupling Spinner
- Surgrip Torque Wrench
- Tank Safety Gauges
- Tong Jack
- Tube Handle Wrench
- Tubing Tongs
- Valve Wheel Wrenches
- Vises
- View All
- Pyplok
- Rubber Products
- Safety Footwear
- Safety Products
- Safety Vest & Traffic Control Equipments
- Sample Handling Systems
- Sampling Cylinders
- SilcoTek
- Sling Tags
- Spare Parts
- Strainer
- Texas Sampling Tools
- Tools & Misc
- Tube & Pipe Fittings
- Valves
Leo Automation Trading
69-01, Jalan Ros Merah 2/2,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
69-01, Jalan Ros Merah 2/2,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
PETOL™ Friction Tongs w/Chain
| Previous | 21 / 24 | Next |
PETOL™ FRICTION TONGS W/CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.
\
PETOL™ Friction Tongs w/Chain |
|||||
|---|---|---|---|---|---|
| CATALOG NO. | O.D. | GRIPPING WIDTH | HANDLE LENGTH | WEIGHT | MAXIMUM WORKING LOAD |
| FA3:3.000 | 3.000' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA3:3.125 | 3.125' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA3:3.250 | 3.250' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA3:3.500 | 3.500' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA3:3.625 | 3.625' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA3:3.750 | 3.750' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA3:4.000 | 4.000' | 4.31' | 51' | 50 lbs. | 8,500 ft-lbs. |
| FA4:4.000 | 4.000' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FA4:4.125 | 4.125' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FA4:4.250 | 4.250' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FA4:4.500 | 4.500' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FA4:4.750 | 4.750' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FA4:5.000 | 5.000' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FA4:5.375 | 5.375' | 4.31' | 46' | 54 lbs. | 10,200 ft-lbs. |
| FAS4:4.000 | 4.000' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| FAS4:4.125 | 4.125' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| FAS4:4.250 | 4.250' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| FAS4:4.500 | 4.500' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| FAS4:4.750 | 4.750' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| FAS4:5.000 | 5.000' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| FAS4:5.375 | 5.375' | 4.31' | 28' | 45 lbs. | 10,200 ft-lbs. |
| Special O.D. sizes available upon request. Special sizes are non-returnable. | |||||
\
WARNING!
Do Not Exceed Maximum Working Load.
Overloading may result in injury or death.
Always use a load cell or other calibrated indicating device to monitor the line pull on the tong to avoid overload.
Read Safe Practices & Procedures Manual prior to operation. Follow OSHA, NSC, etc. standards, safe practices, and procedures.
Do Not Exceed Maximum Working Load.
Overloading may result in injury or death.
Always use a load cell or other calibrated indicating device to monitor the line pull on the tong to avoid overload.
Read Safe Practices & Procedures Manual prior to operation. Follow OSHA, NSC, etc. standards, safe practices, and procedures.